便宜发
金融理财
Sidebar
Blue Star
星期日, 20 09月 2020 11:04
Ti SimpleLink™ CC2640R2 SDK_Software Development Kit
The SimpleLink CC2640R2 Software Development Kit (SDK) delivers components that enable engineers to develop applications on the Texas Instruments SimpleLink Bluetooth Low Energy CC2640R2F wireless MCU. This powerful software toolkit provides a cohesive and consistent software experience for all SimpleLink CC2640R2F users by packaging essential software components such as the Bluetooth low energy (BLE) protocol stack, TI-RTOS kernel and TI Drivers in one easy-to-use software package along with exhaustive documentation.
星期六, 19 09月 2020 12:51
Ti SimpleLink Bluetooth® Low Energy wireless MCUs
Low-power wireless standard to easily connect any product to smartphones or tablets
栏目
蓝牙模块
星期六, 19 09月 2020 11:27
What's new with Bluetooth 5
Double the speed,Four times the range,Eight times the broadcasting capacity
High speed mode
- 2x data throughput
- Faster over-the-air downloads
- Reduce battery consumption
Long range mode
- 4x the range with coded PHY rates of 125 kbps
- Same TX and RX current consumption
- Whole-house coverage
Advertising extension
- Reduce load on advertising channels
- Initiate long-range connections
栏目
科普知识
星期五, 18 09月 2020 23:17
STMicroelectronics Bluetooth low energy expansion board based on the BlueNRG-M0 module for STM32 Nucleo X-NUCLEO-IDB05A2
The X-NUCLEO-IDB05A2 Bluetooth low energy expansion board is based on the BlueNRG-M0 BLE network processor module.
The BlueNRG-M0 is Bluetooth v4.2 compliant, FCC and IC certified (FCC ID: S9NBNRGM0AL; IC: 8976C-BNRGM0AL). It supports simultaneous master/slave roles and can behave as a Bluetooth low energy sensor and hub device at the same time.
The BlueNRG-M0 provides a complete RF platform in a tiny form factor, with integrated radio, antenna, high frequency and LPO oscillators.
The X-NUCLEO-IDB05A2 is compatible with the ST morpho (not mounted) and Arduino UNO R3 connector layout.
The X-NUCLEO-IDB05A2 interfaces with the STM32 microcontroller via the SPI pin and allows changing the default SPI clock, SPI chip select and SPI IRQ by replacing a resistor on the expansion board.
栏目
开发板
星期五, 18 09月 2020 22:31
2020 STMicroelectronics STM32 China Roadshow 13-25 Sep
Make your applications more secure and connected with the STM32
栏目
研讨会
星期四, 17 09月 2020 23:05
Nordic nRF52805 adds Bluetooth 5.2 SoC in WLCSP optimized for compact, two-layer PCB wireless products to proven nRF52 Series
The nRF52805 SoC offers Bluetooth LE high-throughput 2 Mbps and enhanced Channel Selection Algorithm #2, and 2.4 GHz proprietary protocols for cost-constrained applications such as disposable medical products, styluses, sensors, and beacons.
栏目
蓝牙芯片
星期四, 17 09月 2020 19:56
Analog Device EVAL-ADICUP3029
Arduino based Wireless Development Platform for Internet of Things applications based on an ultra-low power ARM Cortex-M3 processor
栏目
开发板
星期四, 17 09月 2020 10:39
SENSOR CHINA Expo & Conference 2020
Sep.23-25,2020,Shanghai Convention & Exhibition Center of International Souring
栏目
展会报道
星期四, 17 09月 2020 07:38
Microchip Dual-Mode bluetooth SoCs and Modules for high-end audio
Microchip news.IS206x
栏目
Videos
星期二, 15 09月 2020 22:46
Microchip BM71-XPRO Development Board
The BM71-XPRO board is designed to be able to easily add Bluetooth Low Energy (BLE) functionality to your XPRO development tools. It can be used as an extension to your favorite SAMx or AVRx XPRO boards or can be used standalone. The BM71 XPRO is fully supported within Atmel Studio with example code in ASF3.
栏目
开发板
登陆
瑞驰车友会微信公众号
